Safety Tips and Procedures for Extinguishing an Electrical Fire

Due to the danger of electric shock and flames, electrical fires can pose a particular threat. For the safety of people and property, knowing What is the main cause of electrical fires. To minimize the risks of an electrical burn and to suppress it effectively, this article examines the necessary steps and precautions.

1. The Situation Assessment:

Evaluate the situation before attempting to put out a fire. Think about the following.

Its size and severity.
Knowledge of electrical equipment and systems.
The safety of the equipment, including fire extinguishers.

2. Disconnect the Power:

In order to deal with an electric fire, you must first disconnect the power supply. It is best to turn off electrical equipment and circuit breakers that are the main cause of fire. You can reduce your risk of electric shock and prevent any further electrical arcing by doing this.

3. Use the right Extinguisher

All fire extinguishers will not work on electrical fires. The incorrect type of fire extinguisher could actually make the situation worse. For electrical fires, a Class-C extinguisher should be used. This extinguisher uses non-conductive materials to put out the fire without conducting electricity.

4. Focus on the Fire’s Base:

If you are using a class C extinguisher to put out a fire, point the nozzle away from the flames and towards the base. This will help to suppress the flames by cutting off their oxygen source. When aiming or operating the extinguisher, keep a distance that is safe.

5. Use short bursts

Instead of continuously spraying, squeeze the handle to the fire extinguisher quickly. You will save extinguishing fluid and have enough to put out the fire.

6. Back Away Safely:

Even after extinguishing the fire, you should still move back from it with caution. Fires that are electrical can reignite. Maintain a safe space and watch the area.

7. You can call for help:

You should always report any fire incident to the local fire station, regardless of how successful you were in putting it out. It is important to call the fire department so they can do a thorough inspection, check for hidden fires, as well as address potential hazards.

Safety and Precautions Measures

Use water under no circumstances to extinguish electrical fires. Electric shocks or fire spread can be caused by water because it conducts electrical current.

Use protective gear. If you can, use personal protective equipment such as goggles and gloves that are insulated to help reduce injury risks when handling electric fires.

You should evacuate if it is necessary. To contain the fire, close all doors and contact professionals.

Inspection and maintenance of electrical equipment: To prevent electric faults, and to reduce the risks of fires caused by electrical wires or wiring, it is important that you regularly inspect and maintain this electrical equipment.

Leave a Reply

Your email address will not be published. Required fields are marked *