What You Need To Know About Installing A Hardwood Flooring

First, you must lay the subflooring before starting any hardwood floor installation project. Sub-flooring creates a smoother floor surface and helps insulate the floor. You can choose from many sub-flooring types because there are so numerous types of floors. Check your instructions carefully to determine which sub-flooring type you should buy. A tool list and installation instructions will be included with your hardwood flooring. Visit our website and learn more about flooring installation chicago.

You will need to cut the subflooring to fit, and then nail it to the floor. For hardwood floors to be supported well, sub-flooring should not exceed a half to three quarters thick. As an underlayment it adds insulation to the floor. You may need to apply joint compound to the floor if it is not perfectly flat. You should allow it to dry before proceeding. Before you lay the hardwood, clean the subflooring.

The most important tools to use are a hammer, a spacer, a saw, a spacer, a level and pull tool. These tools will enable you to cut the flooring exactly to your specifications, attach the boards to the floor, as well as eliminate any gaps between the boards. To mark the area that you will cover, use the chalk lines.

How to install your hardwood floor

The most important when laying a hardwood floor are the first three rows. Make sure to use your level, or an “L”, square, to verify straightness. Use clamps and straps to secure everything. You may need your tapping block or hammer to tighten the groove joints and tongue. To do this, place the blocking on the flooring edge and gently tap the block with a hammer. Don’t force things into place if they don’t belong together.

For stability, glue is applied around each joint’s edge. For stability, make sure you use the right amount of glue. It is possible for glue to cling up and cause damage to your floor’s finish. Before gluing anything, ensure that you test the boards that will go with it.

As you reach the end of the project, you won’t have the space to use the tapping and hammer anymore. Instead, the pulling machine will be used to place the floor. Make sure to not lay your tools directly on flooring that is already completed. Because you don’t want your new floor scratched, be sure to carry a soft cloth.